Product Categories

One Digit LED display

Products Details

Features for custom led digital display

* Low current operation.
* Low power consumption.
* High brightness.
* Industrial standard size.
* Easy mounting on P.C. board or sockets.
* Face color : black / gray .
* Polarity : common anode / cathode

Display picture for reference:

(Ta=25℃) Absolute Maximum Ratings for reference or custom:
Power Disspation	50mW
Peak Forward Current	100mA
Reverse Voltage	5V
Operating Temperature	-20℃ ~ +85℃
Storage Temperature	-30℃ ~ +85℃
Storage Humidity	45℃ ~ +85℃
(Ta=25℃) Electrical-Optical Characteristics for reference or custom:
Parameter	Test Condition	Symbol	Min	Type	Max	Unit
Luminous Intensity	IF=20mA	IV	63.00	74.66	80.00	mcd
DC Forward Voltage	IF=20mA	VF	1.96	1.99	2.10	V
DC Reverse Current	VR=5V	IR	-	-	100	uA
Wavelength Characteristic	IF=20mA	λp	630.00	631.06	633.00	nm
Suggestion Forward Current	-	IF(Sug)	5	10	20	mA
Note: Soldering Bath: not more than 5 seconds at 260℃. The bottom ends of plastic Reflector should be at least 2mm above the solder surface. Soldering Iron: not more than 3 seconds at 300℃ under 30W. Storage & Soldering condition: 1, Store with care, Storing the units in bad condition will cause the reflector sheet and decrease it’s adhesive power, Storage the products under the condition: temperature (25℃±10℃) and humidity(25℃CRH±10℃ CRH) our recommendation. 2,The Soldering Temperature is 260℃±5℃ and Soldering Time should be less than 3 seconds, and soldering iron power should be less than 30W. 3,The soldering point should be farther than 1.6mm from body.